Diziwoods – Motorized Mini Metal Working Lathe Machine DIY Tool Metal Woodworking 6 In 1 With Bow Arm Kit Tool For Hobby Sience Education Modelmaking

Price: $424.55

▶This machine kit can be assembled into 

1)Bow-arm Jigsaw 

2)Wood-turning lathe 

3)Metal lathe

4)Milling machine

5)Drilling machine

6)Sanding machine

7)Hand-held machine

Only one kind of machine can be assembled at the same time.

▶Main parts: headstock, central block, jigsaw base, jigsaw casing, motor blade, gear, milling support, small slider, big slider, radial arm, drilling table, jigsaw table, connection piece, sanding paper panel, vice, drive belt , small grinding wheel , wheel guard etc. All of the parts are made of metal except drive belt, small grinding wheel, wheel guard.

▶Technical parameter:

1.Motor speed: 20,000rpm/min

2.Input voltage/current/power: 12VDC/2A/24W,  switching power input: 110V-240V

3. Size of working table of Jigsaw: 90mm*90mm

4.Maximum diameter of working material for woodturning lathe: 50mm

5.Length of working material of metal lathe and woodturning lathe: 135mm

6. Slider travel: Axis X=145, Axis Y=30, Axis Z=30 (mm)

7. Collets: 1-6mm

8. Working table for drilling: 123*100mm

9. Maximum size of workpiece of machine vice: 50mm

10. Maximum diameter of workpiece of three-jaw chuck: 50mm

11. Center height of metal lathe: 25mm

12. Thickness of working material of jigsaw: hardwood(4mm), plywood(7mm), soft wood(18mm), aluminum(0.5mm), acrylic(2mm).

All machines are safe to touch except milling machines. It is requested to use under adult’s instructions.

It is a good tool for families and schools to make model airplane and other wooden models and crafts.

13. The outer package serves as storage box, is made of plastic instead of foam. There are 3 transparent food-grade plastic boxes inside the storage box for better storage. With the good package, it is much easier for the students to store the machine parts and thus extends the life of the machines. (Remark: Well designed storage b【6 IN 1 KIT】This 6 in 1 kit can be transformed into six different functional machines, jigsaw, woodturning lathe, metal lathe, milling machine, drilling machine, sanding machine, only one kind of machine can be assembled each time.
【REASONABLE DESIGN】Feature over-current, over-voltage and over-heating protection for more safety use, high speed motor for more effective and lower time consumption
【100% SAFETY GUARATEE】The product is specially designed so that it does not hurt the hand. Even if the sawtooth hits the skin, it will only cause slight vibration and will not cut. Shot off the power when not use. Wear protect goggles when operating the machine
【SUIT FOR DIFFERENT PEOPLE】It is Personal equipment, suitable for making models or samples, process teaching, product creation inventions, DIY etc. 6 in 1 multifunctional machine for meeting different needs, it CANNOT be used for high accuracy machining of industrial grade
【GOOD TOOL】It is a good tool for families and schools to do model airplane and other wood model crafts.

One comment

  • That is very attention-grabbing, You’re a very skilled blogger.
    I have joined your feed and sit up for looking for more of your fantastic post.

    Also, I have shared your site in my social networks

Leave a Reply

Your email address will not be published. Required fields are marked *